This renu vero review is a desk review. I haven't touched a Vero, filled one or plugged one in, and I won't pretend I have. What I did was read Renu's product page, its spec sheet, its FAQ and its return and financing pages, then line the numbers up against each other. The angle is a clean split between what the maker says and what I could verify, and the useful part turns out to be that Renu's own pages disagree with each other on a few figures, which I list below.

Renu Vero review: the quick verdict

On paper, the Vero is a 95-gallon cold plunge with a built-in 0.8 HP chiller that plugs into a standard 120V outlet, as long as that outlet sits on its own 15A dedicated circuit. It lists at $7,200 cold only, or $7,500 if you want the heating option, and it carries a 5-year limited warranty. Those are the three facts I'd start from.

I'd put it on a shortlist if you want a chiller tub with a real warranty and you don't want to hire an electrician for a 240V line. I'd skip it if you need to plunge this month, because the page says it ships in 8 to 12 weeks. I'd also hold off until you've asked Renu to explain a few mismatches between the product page and the spec sheet (cooling wattage, empty weight, filled weight). Everything below is the maker's description unless I say otherwise.

Specs and what the maker says

The table lists what the product page shows, and where the spec sheet gives a different number, both appear.

ItemWhat the pages list
Price$7,200 cold only, $7,500 hot + cold ($300 more)
Chiller0.8 HP
Temperature range37–100°F
Electrical120V / 15A, dedicated circuit
Cooling power1,080 W (product page) vs 580 W at 5 A (spec sheet)
Heating power1,200 W (product page) vs 1,100 W at 10 A (spec sheet)
Capacity95 gallons filled
Outside tank size42" x 33" x 39"
Integrated step30" x 18" x 20"
Empty weight153 lbs tub and lid, chiller unit 132 lbs (page) vs 129 lbs dry (spec sheet)
Filled weightabout 1,080 lbs (page) vs about 895 lbs (spec sheet)
FiltrationXL filter, 50-micron, integrated ozone
Noise58 dB from about 3 ft
Insulation2 inches
User heightFits up to 6'6"
Cord15 ft cord, about 2 ft inside the unit, roughly 12 ft usable
Warranty5-year limited

A few notes on that table. The product page describes an integrated, Wi-Fi controlled chiller and heater with filtration and ozone, a lid and one spare XL filter included. It lists four tank colors (Meterous Black, Estonian Sandstone, Basalt Grey and Bianco Romano Granite) and three deck colors (Mocha, Cappuccino and Charcoal). I couldn't verify how the 50-micron filter performs, or whether the ozone system does anything useful at home. Those are the maker's words, nothing more.

The mismatched rows matter. The page's 1,080 W cooling figure is almost double the spec sheet's 580 W, and the page's 1,080 lb filled weight is about 185 lbs above the spec sheet's 895 lbs (my arithmetic: 1,080 minus 895). Both pages are Renu's. One could be a typo, one could be older, or they could describe different configurations. I can't tell which, and I'd rather say so than choose the flattering number.

On price, I re-checked the page on 2026-10-06 and it shows $7,200 for cold only and $7,500 for the hot and cold configuration. I'd treat any figure as a snapshot and look again before ordering.

Who the Renu Vero cold plunge suits

It suits someone with a patio, garage or side yard that has a spot for a roughly 42" by 33" footprint and a circuit that isn't doing anything else. The spec sheet says the integrated step needs about 6" of clearance for an intake vent, so it also suits a space where you can leave a bit of room around the step side and not shove it flat against a wall.

It suits taller people better than some tubs I've read about. The maker says it fits users up to 6'6", and the tank is 39" high outside. The page doesn't give interior dimensions for the water space, only the step, so "fits up to 6'6"" is a claim I can't turn into a measurement. If you're broad in the shoulders, ask for the interior width before you commit.

It also suits a buyer who values a warranty. Five years limited is the term on the product page, and my comparison page lists most tubs in this price tier at 12 months, which makes five years the unusual number. I couldn't read the full warranty terms, though (more on that in the list of gaps), so the headline figure is only as good as the fine print.

Indoors or outdoors, Renu's FAQ says its plunges are designed for either, with an enclosed mechanic's bay protecting the electrical and mechanical parts, and installed on a flat, level surface with room for ventilation and access. If you're considering an indoor spot, read the ventilation line from the spec sheet first.

Last, it suits someone who might want a warm plunge as well. The $300 option adds heating, up to 100°F per the page. I'm not making any claim about the benefits of either temperature. Research on cold and heat exposure is mixed and limited, and if you have a heart condition, high blood pressure or other health concerns, or you're pregnant, ask your doctor before using one.

Renu Vero price and the drawbacks I can see

I can only judge paper, so this is a list of friction points, not a verdict on how it performs.

The lead time is long. The page says "Ships in 8 - 12 weeks". If you're buying for summer, that means ordering in spring at the latest. Delivery is free curbside within the contiguous US, which the page describes as a drop-off at the address on file. A tub that weighs 129 to 153 lbs empty per the two Renu pages, plus a separate chiller unit the page lists at 132 lbs, isn't something you carry alone. Plan helpers and a route.

The circuit is a requirement. Both the product page and the spec sheet say "dedicated", although the FAQ I read only mentions a dedicated circuit for the Cold Stoic 3.0. I'd go with the stricter wording, since two pages agree. A dedicated circuit means the breaker feeds that outlet and nothing else, and 120V times 15A is 1,800 VA (my arithmetic). If the product page's 1,080 W cooling figure is right, that is 9 A at 120V (my arithmetic: 1,080 divided by 120), which is a heavy load on a 15A line. If the spec sheet's 580 W is right, it is far lighter. This is the discrepancy I'd settle first.

The return window is generous but not free. For a new cold plunge, the return policy says returns are accepted within 45 days of delivery, with a 5% restocking fee plus shipping costs. My arithmetic: 5% of $7,200 is $360, before the return freight. A cancellation before shipment also carries a 5% fee. With an 8 to 12 week wait, that matters if your plans change.

The warranty is a headline. The home page lists separate links for home-use terms, commercial terms and an extended chiller warranty, and I couldn't open the home-use terms. So I can tell you it says "5 year limited warranty" on the product page and nothing more. Things I'd want to read before paying: who pays freight and labor on a repair, whether it transfers, and what voids it.

Maintenance is ongoing. The FAQ advises water changes every 4 to 6 months or as necessary, and says standard filters typically need changing every 2 to 6 weeks, with most customers replacing them every 2 to 3 weeks. That is the maker's guidance, and I can't say how it applies to your water or your usage. A replacement filter price wasn't on the pages I opened.

Cooling isn't instant. The FAQ says the process varies by climate and that in hotter climates cooling can take up to a day or a day and a half, at roughly 1 to 2 degrees per hour. That figure is stated in general terms on a general FAQ, not specifically for the Vero, so I wouldn't treat it as a Vero spec.

Prepare your space

Start with the outlet. The spec sheet says a standard US 3-prong (Type B) outlet, 120V / 15A / 60Hz, and a dedicated circuit. Ask an electrician to confirm the breaker serves only that outlet, and to tell you whether the outlet is GFCI protected. Renu's pages I read didn't mention GFCI for the Vero, so I'm not telling you it is or isn't required; an electrician and your local code will answer that. For a deeper look at the arithmetic, my cold plunge electricity cost guide has the formula.

Then the cord. The spec sheet lists a 15 ft cord with about 2 ft inside the unit, leaving roughly 12 ft usable. Put the outlet within that reach without an extension cord. I haven't seen Renu's position on extension cords for this model, so I'd simply avoid one.

Then the pad. The page lists about 1,080 lbs filled and the spec sheet about 895 lbs. Plan for the higher number. The footprint is 42" by 33", which is 1,386 square inches, or about 9.6 square feet (my arithmetic). Spread across that, 1,080 lbs is roughly 112 lbs per square foot (my arithmetic: 1,080 divided by 9.6). I'm not an engineer and can't tell you whether your deck, patio or floor handles that. A level concrete pad or a structural opinion for anything raised is my own cautious preference, not a Renu requirement.

Then clearance. The spec sheet says the step has an intake vent and needs about 6" for ventilation. Leave that space open and don't wall it in.

Then the delivery route. Measure gates and doorways against the 42" and 33" dimensions, and remember curbside means the carrier stops at the curb. If your yard is up a flight of steps, price in a hired crew before ordering.

And last, keep a note of the budget beyond the sticker. My cold plunge cost page covers tub tiers, DIY builds and the running costs that sit on top, and the cold plunge with chiller comparison puts the Vero beside six other options.

How it compares

I compared the Vero to three tubs on my cold plunge with chiller page: the Renu Cold Stoic 3.0, The Plunge, and the Coldture Classic with Chiller Pro. The Vero and Stoic 3.0 figures come from Renu's own pages. The Plunge and Coldture numbers are the ones I recorded on that comparison page from the makers' listings, and I didn't re-open those two pages for this review.

ItemRenu VeroCold Stoic 3.0The PlungeColdture Classic + Chiller Pro
Price$7,200 cold only$11,399$5,990 (listed down from $6,990)$3,499 sale, $3,999 regular
Chiller0.8 HP0.5 HP1/2 HPNot shown
Circuit120V / 15A dedicated120V / 15A dedicated120V / 15A GFCI120V, 8A, standard 15A outlet
Temperature37–100°F37–104°Fdown to 39°F37–104°F
Warranty5-year limited5-year limited12 months1 year

My arithmetic on the gaps: $11,399 minus $7,200 is $4,199, so the Stoic 3.0 costs about $4,200 more. $7,200 minus $5,990 is $1,210, which is what you pay over The Plunge. $7,200 minus $3,499 is $3,701 over the Coldture sale price.

Vero against Cold Stoic 3.0 is the closest fight, because both are Renu tubs with 5-year warranties and 37°F floors. The spec sheet gives the Stoic 3.0 an exterior of 70" by 33" by 35", a 40" by 25" by 31" water tank and 91 to 104 gallons of capacity, against the Vero's shorter 42" by 33" by 39" body. The Stoic is a long chest, and the Vero is a compact, taller tub with a step. The Stoic 3.0 lists 518 W cooling and 1,013 W heating, and the Vero's spec sheet lists 580 W cooling and 1,100 W heating, though the Vero product page lists 1,080 W and 1,200 W. If the spec sheet is right, the two draw similar power while cooling. If the product page is right, the Vero draws roughly double. That's why the mismatch matters to anyone comparing renu vero vs cold stoic 3.0 on running cost.

On value, the Vero's chiller is larger (0.8 HP against 0.5 HP) and it costs about $4,200 less. The Stoic 3.0 offers a longer body and a bigger documented tank. I can't say which cools faster in practice, since I haven't seen a side-by-side measurement.

Against The Plunge, the Vero costs $1,210 more and brings a warranty that runs for 5 years instead of 12 months. The Plunge's floor is 39°F against the Vero's 37°F. Whether $1,210 is worth the extra four years of cover depends on how much you trust the fine print of that cover, which I couldn't read.

Against the Coldture bundle, it's a different price class. At $3,499 you're paying about half the Vero's price, with a one-year warranty and no horsepower figure on the listing. The Coldture draws 8A on a standard 15A outlet, which is an easier electrical ask than a dedicated line. If your budget is the hard limit, that's the trade; the extra money gets you a longer warranty and a documented 0.8 HP chiller, and I can't say it gets you better water.

Frequently asked questions

How much does the Renu Vero cost?

The product page lists $7,200 for the cold-only version and $7,500 for hot and cold, a difference of $300. Free curbside delivery within the contiguous US is included. Renu's financing page lists Shop Pay Installments (3 or 12 months, depending on approval), Bread Pay and TrueMed for HSA or FSA funds. I didn't check whether a Vero purchase qualifies for HSA or FSA, so don't assume it.

Does the Renu Vero need a special outlet?

It uses a standard US 3-prong outlet at 120V and 15A, but the spec sheet and the product page both say it requires a dedicated circuit. That means the breaker serves only that outlet. An electrician can confirm what you have.

How cold does the Renu Vero get?

The maker lists 37°F up to 100°F on both the product page and the spec sheet. The FAQ gives a general cooling rate of about 1 to 2 degrees per hour in hotter climates, and says cooling can take up to a day or a day and a half. I haven't seen a Vero-specific cooling time, so ask Renu what to expect from your tap water in your climate.

Can I use the Renu Vero outdoors?

The FAQ says Renu plunges are designed for indoor and outdoor use, with an enclosed mechanic's bay protecting electrical and mechanical components. It doesn't list an outdoor temperature range in the text I read. If winters in your area get severe, ask the maker in writing what the limits are before installing outside.

Can I return it?

The return policy says a new cold plunge can be returned within 45 days of delivery for a 5% restocking fee plus shipping costs, with refunds taking 3 to 10 business days after the unit is received in good condition. Refurbished units are final sale. Read the whole page for exclusions.

Is the Renu Vero worth it?

I can't say from use, because I haven't used one. On paper, you get a 0.8 HP chiller, a 37°F floor and a 5-year limited warranty at $7,200. That sits between The Plunge and the Cold Stoic 3.0 on price. Until Renu reconciles its own cooling wattage and weight figures, I'd treat the worth question as open.

What I could not verify

I want this list to be as useful as the specs above.

On temperature, the Vero's product page and spec sheet agree on 37–100°F, so there is nothing to flag there.

What I would do

If I were considering the Renu Vero today, I'd start with the two numbers I can't reconcile. I'd email Renu and ask, in writing, for the Vero's real cooling wattage, filled weight and the complete home warranty terms. If the answers come back as the spec sheet says (580 W cooling, about 895 lbs filled), the Vero looks like a strong value against the Cold Stoic 3.0. If they come back as the product page says, I'd budget for a heavier load and a sturdier base.

Then I'd get an electrician to confirm a dedicated 15A circuit within about 12 ft of the spot, and measure the delivery route. I'd order only if I could wait the 8 to 12 weeks the page lists and I was comfortable with a 45-day return window that costs 5% plus shipping if I change my mind. If you only want the cheapest chiller tub with a legible spec list, my cold plunge tub guide will point you toward the other options, and the cold plunge with chiller page puts the numbers side by side.

For a backyard buyer who wants a 5-year warranty without paying Stoic 3.0 money, my renu vero review comes down to this: it's a sensible spec sheet at $7,200, with two of its own numbers I'd want Renu to explain before I paid. Check with your doctor first if you have any health concerns about cold exposure.